Description

Technical Specification

A strobe and vibrating pillow pad is designed to give warning of an emergency activation to deaf and hard of hearing occupants.
pre-wired 13 amp plug (with a 3 amp fuse).
Integrated ‘Test’ button on the front of the unit. Pressing this checks strobe and control circuitry and also send out a RadioLINK alarm signal to other units in the system.
For use with 3000 and 140 Series (when used with a RadioLINK base, RadioLINK+ module or the SmartLINK module) RadioLINK Carbon Monoxide (CO) Alarms. It can also be used with all other RadioLINK devices, including the 600 Series RadioLINK smoke and heat alarms.
The vibrating pillow pad is suitable for mounting under mattresses or pillows and produces strong, pulsed vibrations suitable for waking sleepers. Supplied with locking plug and 5m of pre-wired cable.
Eliminates the need for any cabling between the Ei170RF and the smoke, heat and/or CO alarms used in the system.
Radio frequency: 868MHz band in accordance with R&TTE Directive 1999/5/EC – this band has been designed for use with safety products and only allows a 1% duty cycle, so continuous transmission and interference from external sources is extremely remote, and would be illegal.
Requires 230V AC, 50Hz mains power supply.
The unit has a built-in high-intensity LED strobe (flash rate 0.8Hz) with a wide light output angle.
Complies with EN300220-2V2.1.1.
Built-in long life sealed rechargeable battery to provide back-up power in the event of mains failure.
RF Range: The type of building will be the major limiting factor e.g. the number and type of walls/ceilings that the radio signal has to pass through. As a guide, 30m should be the maximum distance between any of the RadioLINK units in the system.
Mains transformer is mounted in separate and hard-wired to the strobe unit with 4m of low voltage cable. Supplied with 2m of mains cable
Up to 12 RadioLINK units can be used in one system. For larger systems contact our Technical Department for guidance.
Dimensions: Strobe – 150mm x 86mm x 28mm. Vibrating pad – 98mm x 34mm
Units are in factory code when received (they will all communicate with each other). They must be ‘House Coded’ to eliminate the risk of adjacent properties communicating with each other. After ‘House Coding’ they will only communicate with other RadioLINK units coded at the same time.
Product weight: 604g
Temperature range: -10 to 40°C.
The product is CE marked to indicate conformance to directives – EMC (89/336/EEC) tested to EN50130-4; Low Voltage (73/23/EEC) tested to EN60065; R&TTE (1999/5/EC) tested to EN300220-2V2.1.1.
Humidity Range: 15 to 95% relative humidity.
Designed for wall or surface mounting.
5 year guarantee.
Manufactured in Ireland.

Product Description

Alarm Compatibility

The Ei170RF is compatible with the 3000 Series, 600 Series and 140 Series, along with any interconnected Carbon Monoxide Alarms. It links into the alarm system using RadioLINK wireless interconnection technology, making it easier to add into a system and causing less disruption to the occupants on installation.

RadioLINK Technology

As with other RadioLINK products the Ei170RF will need to be linked into the alarm system or ‘House Coded’.
An integral ‘Test’ button is also present on the front of the unit, allowing an easy means of testing the strobe, vibration pad and the RadioLINK enabled alarms in the system.

Operation of the Ei170RF

The green ‘power’ indicator light on the front of the strobe unit will illuminate to show mains power is present.

On receipt of a RadioLINK alarm or test signal, the strobe will flash, and the vibration pad will be activated. the red ‘Alarm’ indicator light will also flash.

Pressing the ‘Test’ button will check and activate the strobe and vibration pad. The unit will also send out a RadioLINK alarm signal that will activate all RadioLINK units in the system.

Secure Your Property with the World-Leader in Fire & CO Protection

Don’t compromise on life safety. As the Dealer of Aico UK in the UAE and GCC, gasdetectors.ae provides the most advanced fire detection solutions for residential villas, commercial buildings, and industrial projects across Dubai, Abu Dhabi, Saudi Arabia, Qatar, Oman, Kuwait, and Bahrain.

Why Choose Aico UK via Gasdetectors.ae?

Expertly Engineered: Shop the full range of Aico 3000 Series, including Optical Smoke Alarms, Heat Detectors, and Carbon Monoxide (CO) Alarms.
Multi-Sensor Technology: Deploy high-performance Multi-Sensor Alarms that combine heat and optical sensors to reduce false alarms.
Smart Home & IoT Ready: Leverage SmartLINK® and RadioLINK+ technology for seamless wireless interconnection and real-time IoT remote monitoring via the Aico Gateway.
Data-Driven Safety: Use AudioLINK+ to extract real-time data reports directly to your smartphone for maintenance and compliance tracking.
Unrivaled Reliability: Choose from mains-powered alarms with 10-year lithium battery backups or standalone long-life battery units designed to withstand the GCC climate.

Protect Your People. Comply with Standards.

Whether you are looking for interconnected smoke alarms for a smart villa in Riyadh or BMS-integrated fire safety for a high-rise in Dubai, we provide the British-standard excellence of Aico with local technical support.

Reviews

There are no reviews yet.

Be the first to review “Ei170RF RadioLINK Alarm Module for the Deaf & Hard of Hearing”

Ei170RF RadioLINK Alarm Module for the Deaf & Hard of Hearing